Menu
Your Cart

Double-track trim snap button 30 mm E 1794

Double-track trim snap button 30 mm E 1794

Double-track trim snap button 30 mm is a snap fastener for textile, leather-goods or bag production. Compare the metric size and actual attachment structure with the intended application before ordering.

Key Features

  • Verified metric size from the listing
  • Model-specific construction
  • Textile and hardware application
  • Finish or color based on active options
  • Selectable pack quantity
  • Suitable for sample evaluation
$1.78
500 or more $1.60
2500 or more $1.06
5000 or more $0.88

Available Options

Double-track trim snap button 30 mm is a snap fastener intended for apparel, bags and textile applications where a quick opening and closing system is required. Buying the correct snap depends on more than appearance. Actual size, snap system, fabric thickness, compatible setting die and press setup should be reviewed together before production.

Key Features

  • Size: 30 mm
  • Material: Verify from product data
  • Application: Apparel and Sewing, Blazers and Outerwear
  • Installation: Press-set with a compatible setting die
  • Minimum order: 1 pcs
  • Best practice: Test on production fabric before a larger run

What Matters When Choosing a Snap Fastener?

Diameter alone does not determine compatibility. Cap, socket, stud and post components must belong to the same snap system. Fabric thickness and the number of layers also affect setting pressure and post engagement.

Setting Die and Press Compatibility

This product family requires a compatible setting die matched to the snap system and size. A manual hand press can be used when the correct die set is installed. Do not select the die by appearance alone.

Typical Applications

Snap fasteners can be used on jackets, coats, shirts, childrenswear, bags, leather goods and many textile products. Suitability should always be checked against the actual snap size and system.

Before Ordering

  • Confirm snap size and system.
  • Check fabric thickness.
  • Select the correct setting die.
  • Test press pressure on a sample.
  • Coordinate plating with other metal hardware.

Frequently Asked Questions

Does this snap require a setting die?

Yes. Use a die made for the same snap system and size.

Can it be installed with a hand press?

Yes, when a compatible die set is fitted to the press.

How do I choose the correct size?

Compare the diameter and component system with the snap already used in your project.

Will any snap die work?

No. Setting dies are system and size specific.

What should I test before production?

Test the snap on the actual fabric to confirm engagement, setting pressure and fabric behavior.

Shopping and Filter Features
Product TypeSnap Fastener
Primary ApplicationApparel and Sewing, Blazers and Outerwear
Size / Working Width30 mm
Attachment MethodPress / Setting Tool

All orders are custom made. The processing time depends on the total amount of orders. Currently the processing time (queue) is: 1-3 workdays

The processing time is adjusted daily. Urgent? Please contact us.

Shipping Cost of Your Orders: According to your location, the most suitable shipping costs for you are automatically calculated according to the weight of your order. You can see the shipping costs on the payment page.
Below you can see the promotional shipping costs for certain regions.

European Union: 8.60 EUR - 9.37 EUR - (0 - 0.5 KG)
USA : 6.85 USD -15.30 USD

Shipping times are provided under the shipping options offered to you. Shipping times are the average times given by the carrier cargo companies.
Shipping time may vary depending on your location.
Please check the orders section of the account you created when ordering or the cargo information mails sent to you.
If the account was not opened and the e-mail information was not received while placing the order, first check your SPAM box.

Our shipments are made with DHL, TNT, Fedex, Turkish Post and other companies.
All you have to do is choose the most suitable Shipping for you.
Good Shopping

Write a review

Note: HTML is not translated!
Bad Good

Prices presented on the product page are for standard coating colors.

Please contact us for the current price for coatings other than standard colors. Some non-standard color samples are given below.

  • Gold
  • Light Gold
  • Silver
  • Gun Metal colors
  • Plain Paint Colors (Matt Black, Glossy Black, Red .... Colors closest to the customer's fabric can also be made.)

Please ask for prices for the above sampled colors.

 

Special coating color orders are valid for the following quantities.

1- Buttons - Shank Buttons - 2 and 4 Holes Buttons 

  •   0 - 10 mm diameter button for 1500 pcs.      

  •  10 - 20 mm diameter buttons for orders of more than 1000 pieces    

  •   20 - 30 mm diameter buttons for orders over 1000 pcs.     

  •   30 to 40 mm diameter for 1000 pcs or more

 

2- Snap Fastening - Snap Buttons   

  •     For orders over 1000 pcs and above,

 

3- Buckles   - For orders over

  • Center Bar Buckles: 500 pcs and above,
  • Pin Buckles : 500 pcs and above,
  • Snap Buckles: 500 pcs and above,
  • D rings : 1000 pcs and above,
  • O Rings : 1000 pcs and above,
  • Square and Rectangle Rings: 1000 pcs and above,

 

4 - Eyelets - Gromets

  • For orders over 1000 pcs and above,

 

5- Zipper Pulls

  • For orders over 1000 pcs and above,

 

6- Rivets 

  • For orders over 1000 pcs and above,

 

7- Cord Ends and Cord Locks - Stopers

  • For orders over 1000 pcs and above,

 

Customer-preferred color coating is made. Price differences arising from the coating color are reflected in the product price. Delivery time is 3-4 working days. Please contact us for further information.

 

Change requests can be reviewed if the order has not entered preparation, custom finishing, production or shipping. Contact us as soon as possible with your order number. Once custom work has started or the parcel has been handed to the carrier, available options depend on the order status.

Check the current status in your account order details. When tracking information becomes available, it is shown in the order record or shipping notification.

Available payment methods are shown at checkout. Bank transfer and supported secure online payment methods may be available. Options can vary by store, country and order conditions.

If bank transfer is offered at checkout, you can select it as your payment method. Use only the current bank details shown during checkout or in your order notification, and include your order number in the payment reference.

Once your payment reaches our account, your order enters payment verification. If needed, you can send the receipt through the store contact channels together with your order number.

Preparation time depends on stock, selected color or finish and any custom production requirement. Transit time after dispatch depends on the destination, address and carrier.

Yes. We accept international orders. Shipping method, cost and estimated transit time depend on the destination, parcel details and carrier.

Taxes depend on the store, destination country and order conditions and are shown in the cart, checkout summary or invoice. Check the current tax amount during checkout.

If stock or production availability changes, we contact you. Depending on the order status, we may offer a new preparation time, an alternative option or a refund process.

Send your cancellation request with your order number as soon as possible. Requests can be reviewed if preparation, custom finishing, production or shipping has not started. Available options for orders already in process depend on the order status.

Yes. For wholesale, business or custom-production requests, send the product code, quantity, color or finish preference and destination country to request a quotation.

Adding an item to the cart does not by itself reserve stock. Stock and option availability are confirmed when the order is placed and enters processing.

For more information, please contact us through our contact page.